2)Get your new joystick and controller ready. View Original
3)Take out the 9 screws. Note that the top 2 screws are slightly smaller in size and may require you to grab a finer tip screwdriver in order to take out. View Original
4)Once all 9 screws have been removed gently pull off the back piece. View Original
10)Screw back in the 3 screws. Plug back in the cable and put the "Z Button" back in place. Be careful when putting it back in as you do not want to break the tabs. View Original
11)Before putting on the bottom make sure the cord is lined up like shown below. View Original
12)Be sure to line up the controller shell when putting it back together. View Original
13)Put your 9 screws back in. Remember the 2 smaller screws go on top. You really don't have to put the 2 smaller screws back in if you do not want to. View Original
14)Make sure all of the buttons work correctly and that's it! View Original
